Gate Accessories
MicroDrive Mechanical End Stop
Mechanical end stop for Magnetic Gates to stop the arm from fully retracting ( used with lower ceili..
$0.00
Non-Breakaway Flange Set
Holds the grey section and arm on the gate column. The non-breakaway flange is typically used with a..
$0.00
Optex 21" Metal Curb Post
Curb post for mounting optex sensors above ground loop (OVS-02GT) and overheight sensors (OVS-01CC)..
$0.00
Optex L Mount Bracket
Optex bracket that is mounted on the gate side when using the optex OVS-02GT...
$0.00
OPTEX OAM-Explorer
The Optex OAM-Explorer is used for various types of doors, including overhead, folding, and sectiona..
$0.00
Optex Vehicle Detector - Above Ground Loop OVS-02GT
External loop that be used for arming or safety, typically used in locations that have post tension ..
$0.00
Optex Vehicle Detector - Over Height Sensor
26' range, typically used for overheight vehicles and car counting...
$0.00
Service Module, Magnetic Gate
Used for upgrading/downgrading firmware, and copying controller settings on gate controllers..
$0.00
Short Gray section with Hardware
Short Gray section with HardwareNOTE: This is the straight grey section only, there are no clamps su..
$0.00
SOS Emergency Access System
Installed on gate a Siren Operated Sensor (SOS) has been used to open residential, commercial, airpo..
$0.00
1x 2x6 20' lead National loop with 2x goop
This ship kit consists of 1x) 2 x 6 20' lead with 2 loop goop..
$0.00
National loops - 3' x 6' 18AWG Preformed Saw Cut Loop w/ 50' Lead-in
National loops - 3' x 6' 18AWG Preformed Saw Cut Loop w/ 50' Lead-in..
$0.00
National loops - 2' x 6' 18AWG Preformed Saw Cut Loop w/ 30' Lead-In
National loops - 2' x 6' 18AWG Preformed Saw Cut Loop w/ 30' Lead-In..
$0.00
National loops - 3' x 6' 18AWG Preformed Saw Cut Loop w/ 20' Lead-In
National loops - 3' x 6' 18AWG Preformed Saw Cut Loop w/ 20' Lead-In..
$0.00
National loops - 3' x 6' 18AWG Preformed Saw Cut Loop w/ 30' Lead-In
National loops - 3' x 6' 18AWG Preformed Saw Cut Loop w/ 30' Lead-In..
$0.00
Flash Gate Forcing Arm for 84" Articulating Arm
Flash Gate Forcing Arm for 84" Articulating Arm..
$0.00
1 x Loop, 2 x Goop
Everything needed to install a loop. This kit consists of : (1) SC18-50 Loop (forms standard 3 x 6 l..
$0.00
